Datacenter proxies vs residential proxies is a trade between price and acceptance. Datacenter proxies are fast and cost a fraction per gigabyte, but websites can see that their IPs belong to hosting companies. Residential proxies cost more per gigabyte, but their IPs belong to real home connections, so far fewer sites refuse them. The right choice depends less on the proxy than on the website you are sending traffic to. This guide compares the two on speed, detection, targeting and real cost per successful request, then shows how to use both together so you only pay residential prices where you need to.
The short version
Use datacenter proxies for sites that do not filter by IP type, and residential proxies for sites that do. Datacenter proxies start from $0.35 per GB in 62 countries; residential proxies start at $3.50 per GB and fall to $1.50, with more than 30 million IPs and city-level targeting. Judge them by cost per successful request, not cost per GB, and route traffic to residential only when datacenter IPs start getting blocked.
Chapters and transcript
- 0:00 Intro
- 0:22 What makes proxy types different?
- 0:48 Datacenter proxies
- 1:22 Residential proxies
- 1:57 ISP proxies (static residential)
- 2:32 Mobile proxies
- 3:03 Side by side: speed, blocks, cost and coverage
- 3:41 Which proxy type should you use?
- 4:11 Two more options: unlimited residential and dedicated mobile
- 4:29 Try it yourself
Intro. There are four main types of proxy: datacenter, residential, ISP and mobile. They all hide your own IP address, but they differ in where their IP comes from, how often websites challenge them, how fast they are, and how you pay for them. In the next few minutes you'll see each type, a side-by-side comparison, and which one fits which job.
What makes proxy types different? What makes proxy types different? Who owns the exit IP address. Every IP belongs to a network, and anyone can look up whether that's a hosting company, a home internet provider, or a mobile carrier. Many websites treat those groups differently. That one fact drives every trade-off in this video: the more an IP looks like a real person's connection, the fewer challenges it meets, and the more it usually costs.
Datacenter proxies. Datacenter proxies use IP addresses owned by hosting companies, running on servers. They're the fastest and cheapest type, and the most consistent. The catch is that hosting ranges are easy to spot, so strict sites challenge them more often than any other type. ProxyEmpire's datacenter pool has more than 197,000 IPs in 62 countries, targeted by country, with a new IP per request or a sticky session. It's billed per gigabyte. Use datacenter proxies for sites that don't care where your traffic comes from.
Residential proxies. Residential proxies send your requests through real home internet connections, so websites see an ordinary household's IP. They meet far fewer blocks than datacenter IPs, and they cover almost any location. ProxyEmpire's residential pool has more than 30 million IPs in over 170 countries, with targeting down to city, ZIP code, ISP and ASN. Each exit is a home connection, so speed varies more than on servers, and you pay per gigabyte. For most scraping, price monitoring and search research, residential is the default choice.
ISP proxies (static residential). ISP proxies, also called static residential proxies, give you one fixed IP address that belongs to a consumer internet provider, but runs on a server instead of in someone's home. Websites see a home provider's network, and you get server speed and uptime. The IP doesn't rotate: it stays yours for the whole subscription. ProxyEmpire offers them in 24 countries, targeted by country, billed per IP per month, with unlimited traffic under a fair-use cap of 100 gigabytes per IP. Choose them for long sessions, and for anything that needs the same IP every day.
Mobile proxies. Mobile proxies use IP addresses from mobile carriers' 4G and 5G networks. Carriers share each public IP among many phone users, so websites are careful about blocking them, and mobile IPs meet the fewest challenges of all. ProxyEmpire's rotating mobile pool has more than four million IPs in over 170 countries, with carrier targeting. Mobile proxies are the slowest and the most expensive per gigabyte, so save them for the strictest sites, and for jobs where you need to see what phone users see.
Side by side: speed, blocks, cost and coverage. Here's how the four compare. Speed: datacenter is fastest, ISP is close behind, and residential and mobile vary with each connection. Challenges: datacenter IPs meet the most, residential and ISP far fewer, and mobile the fewest. Cost: datacenter is the cheapest per gigabyte and mobile the most expensive, with residential in between, while ISP proxies are billed per IP instead. Coverage: residential and mobile reach over 170 countries with fine targeting; datacenter covers 62 countries and ISP 24, both targeted by country.
Which proxy type should you use? So which proxy type should you use? Start with the job, not the label. If the site is easy to reach and speed matters most, use datacenter. For large scraping and monitoring jobs on protected sites, or when you need many locations, use rotating residential. If you need the same IP every day for weeks, use ISP. For the strictest sites, or a phone's view of a site or app, use mobile. Many teams combine them: datacenter for easy targets, residential for everything else.
Two more options: unlimited residential and dedicated mobile. ProxyEmpire also sells two variations. Unlimited residential proxies are billed by connection speed instead of gigabytes, for very large volumes. And dedicated mobile proxies give you one private 4G or 5G connection that only you use, billed by the day, week or month.
Try it yourself. If you want to compare them yourself, ProxyEmpire's $1.97 trial includes 100 megabytes of residential and 50 megabytes of mobile data, and it doesn't expire. Send the same requests through a residential and a mobile IP, and check what websites see with our free proxy checker. The links are in the description. Thanks for watching.
Datacenter Proxies vs Residential Proxies at a Glance
Cheap and fast, or trusted and flexible| Datacenter proxies | Residential proxies | |
|---|---|---|
| IP owner | Hosting and cloud companies | Consumer internet providers |
| Where traffic exits | Servers in data centres | Real household devices and routers |
| Speed | Very fast, consistent | Good, varies by connection |
| Acceptance on protected sites | Lower: easy to identify | High: looks like ordinary visitors |
| Targeting at ProxyEmpire | 62 countries, country level | 170+ locations: country, region, city, ZIP, ISP, ASN |
| Rotation | New IP per request or sticky sessions | New IP per request or sticky sessions |
| Price at ProxyEmpire | From $0.35 per GB | $3.50 down to $1.50 per GB |
Mobile and ISP proxies are two more options with their own trade-offs; our overview of residential, mobile and datacenter proxies compares all four side by side. This guide goes deeper on the two most common choices.
What Are Datacenter Proxies?
IPs from hosting providers, running on serversA datacenter proxy forwards your traffic through a server in a commercial data centre, using an IP address registered to a hosting or cloud company. These networks are built for throughput: fast links, low latency and hardware that runs around the clock. Providers can add IPs in large blocks, which keeps the price per gigabyte low and the connections stable.
Datacenter proxies come in a few forms. Shared proxies give many customers the same IPs; dedicated or private proxies give one customer exclusive use of each IP; rotating datacenter proxies put a gateway in front of a large pool and hand out a fresh IP per request or keep a sticky session. ProxyEmpire’s rotating datacenter proxies work the rotating way, with about 197,000 IPs across 62 countries, country-level targeting, and HTTP, HTTPS and SOCKS5 on the same credentials. Plans run from 40 GB for $25 to 5,000 GB for $1,750, which is $0.35 per GB.
The weakness is visible in the first sentence: the IP belongs to a hosting company. Anyone can look up which organisation owns an address, and a real shopper rarely browses from a server rack.
What Are Residential Proxies?
Household connections shared with consentA residential proxy sends your request out through a real device on a home internet connection, whose owner has agreed to share spare bandwidth. The exit IP is the household’s own address from its broadband provider, so to the website it is simply another visitor. A gateway in front of the network lets you choose the country, region, city, ZIP code, ISP or ASN, and whether each request gets a new IP or a sticky session keeps the same one.
ProxyEmpire’s residential network has more than 30 million IPs in more than 170 locations, with targeting included at no extra charge and sticky sessions that have no fixed time limit: the IP stays until you rotate it or the device behind it goes offline. The costs are the price per gigabyte and a speed that depends on each home connection. Our guide to what residential proxies are covers how networks are sourced and what to look for in a provider.
Why Websites Treat Datacenter and Residential Proxies Differently
It starts with who owns the IPEvery IP address on the internet is registered to an organisation and announced under an autonomous system number (ASN). Commercial IP intelligence databases label those networks: hosting, business, consumer broadband, mobile carrier. Many websites, and most anti-bot services, check that label on every request. The consequences depend on the site:
- Sites that do not check at all. Many public pages, small shops, documentation, most APIs and your own websites accept any IP. Datacenter proxies work perfectly here.
- Sites that rate-limit per IP. They care about volume, not origin. Datacenter proxies usually work if you rotate and keep request rates reasonable.
- Sites that score IP type. Large retailers, travel sites, search engines, social networks and ticketing platforms often challenge or block hosting IPs outright, or serve them a CAPTCHA. Residential proxies are the practical option.
Two other signals matter. Datacenter IPs tend to sit in neat, consecutive blocks, so a site that blocks one address can block its whole range at once; residential IPs are scattered across thousands of providers and neighbourhoods. And shared datacenter IPs carry the history of every other customer who used them. None of this is about the proxy being “bad”: a hosting IP is honest about what it is, and some sites simply choose not to serve traffic from servers.
Key takeaways
- Datacenter IPs belong to hosting companies; residential IPs belong to consumer ISPs.
- Datacenter proxies are faster and far cheaper per GB, and work on sites that do not filter by IP type.
- Residential proxies get through on protected sites and target down to city and ZIP.
- Compare cost per successful request, and route traffic to the cheapest proxy that works.
Datacenter vs Residential Proxies: Cost per GB vs Cost per Success
The cheapest proxy is the one that gets the pagePrice per gigabyte is easy to compare and easy to misread. What you actually buy is successful responses: pages with the data in them, not block pages, CAPTCHAs or empty results. A blocked request still uses traffic, and retries multiply it. The example below is illustrative, but the logic applies to any project: collect 100,000 product pages of about 250 KB each, so 25 GB if every request succeeds the first time.
| Target site | Datacenter success rate | Datacenter cost | Residential cost |
|---|---|---|---|
| Unprotected catalogue | About 98% | ~25.5 GB × $0.625 = ~$16 | ~25 GB × $3.50 = ~$88 |
| Moderately protected shop | About 60% | ~42 GB × $0.625 = ~$26, plus slower runs | ~26 GB × $3.50 = ~$91 |
| Heavily protected marketplace | Under 10% | Most pages never arrive | ~27 GB × $3.50 = ~$95 |
Prices use datacenter’s smallest plan ($0.625 per GB) and residential pay-as-you-go ($3.50 per GB); both fall on larger plans. The pattern is clear. On open sites, datacenter proxies win by a factor of five or more. On moderately protected sites they are still cheaper, as long as your scraper retries well and you can live with the extra time. On heavily protected sites the question is not price but whether you get the data at all. Run your own numbers with a small test: success rate on your real targets is the only input that matters, and our pricing page has the current plan rates.
Datacenter or Residential Proxies: Which to Use for Your Job
Recommendations by use case| Job | Start with | Why |
|---|---|---|
| Scraping open sites, APIs and documentation | Datacenter | No IP filtering; lowest cost and fastest runs |
| Load and uptime checks on your own sites | Datacenter | You control the target; speed matters |
| Bulk downloads of public files | Datacenter | High throughput at a low price per GB |
| E-commerce price and stock monitoring | Residential | Retailers often filter hosting IPs and vary prices by city |
| SEO rank tracking and local search | Residential | Search engines challenge servers; results differ by city |
| Ad verification | Residential | Ads are targeted at real users in real places |
| Social media and marketplace accounts | Residential or ISP | Platforms distrust hosting IPs; accounts need consistency |
| Mobile-first apps and sites | Mobile | Carrier IPs show what 4G and 5G users see |
If a job needs the same IP every day, for example a handful of accounts that must always log in from one address, consider ISP proxies, which combine a consumer ISP’s IP with server speed; our guide to ISP vs residential proxies explains when they beat both. For search-engine work specifically, see proxies for SEO, and for monitoring projects, price monitoring with proxies.
Use Both: A Datacenter-First Fallback Setup
Pay residential prices only where you have toMost serious scrapers do not choose one type forever. They send each request through the cheapest proxy that works for that site, and escalate when it stops working. With ProxyEmpire both products live in one dashboard, so the logic fits in a few lines:
import requests
DC = "http://DC_USERNAME:PASSWORD@DC_HOST:PORT"
RES = "http://RES_USERNAME:PASSWORD@v2.proxyempire.io:5000"
BLOCK_MARKERS = ("captcha", "access denied", "unusual traffic")
def looks_blocked(r):
return r.status_code in (403, 429) or any(
m in r.text.lower() for m in BLOCK_MARKERS)
def fetch(url):
for proxy in (DC, RES):
try:
r = requests.get(url, proxies={"http": proxy, "https": proxy},
timeout=30)
if not looks_blocked(r):
return r
except requests.RequestException:
pass
return None
Keep per-site statistics as you go. When a domain fails on datacenter IPs most of the time, send it straight to residential and save the wasted first attempt; when a residential-only domain relaxes, test datacenter again. Over a large project this routing usually cuts proxy spend sharply compared with sending everything through residential, without losing coverage. Our Python web scraping guide covers retries, timeouts and sessions in more detail.
A few habits help whichever type you use: set realistic timeouts, back off when you see 429 responses, validate the content of every page rather than trusting the status code, and keep request rates in line with what a site can comfortably serve. ProxyEmpire’s support team is available 24/7, staffed by real people, if a target behaves unexpectedly.
ProxyEmpire proxies are for lawful use. Some site categories, such as banking, payment and government websites, are blocked by default on all products.
Datacenter vs Residential Proxies FAQ
Straight answersWhat is the difference between datacenter and residential proxies?
Datacenter proxies use IPs owned by hosting companies and run on servers. Residential proxies use IPs from consumer internet providers and exit through real home connections.
Which is faster, datacenter or residential proxies?
Datacenter proxies. Server hardware and data-centre links give consistently low latency, while residential speed depends on each home connection.
Are datacenter proxies easier to detect?
Yes. Their IPs are registered to hosting companies, which any IP lookup shows, so sites that filter by IP type can recognise them.
Which is cheaper?
Per GB, datacenter by far: from $0.35 per GB against $1.50 to $3.50 for residential. Per successful request on protected sites, residential is often cheaper because far fewer requests fail.
Which is best for web scraping?
Datacenter for sites that accept them, residential for sites that do not. Many scrapers start with datacenter and fall back to residential per domain.
Can I rotate IPs with both types?
Yes. ProxyEmpire’s datacenter and residential proxies both offer a new IP per request or sticky sessions.
Do datacenter proxies support city targeting?
Not at ProxyEmpire: datacenter proxies target by country in 62 countries. Residential proxies add region, city, ZIP, ISP and ASN targeting at no extra charge.
References
How IP ownership is registered- IANA: Number resourcesHow IP addresses and AS numbers are allocated
- ARIN: Autonomous System NumbersWhat an ASN is and who needs one
- RIPE NCC: AS numbersRegistration of networks in Europe and the Middle East
- MDN: 429 Too Many RequestsRate limiting and the Retry-After header
Datacenter and residential proxies in one account
Datacenter proxies from $0.35 per GB in 62 countries, and more than 30 million residential IPs with city, ZIP, ISP and ASN targeting at no extra cost. One dashboard, no concurrent session limit, 24/7 support from real people and a $1.97 trial.



